1. Click on “Start” in the bottom left hand corner of screen
2. Click on “Run”
3. Type in “command” and hit ok

You should now be at an MSDOS prompt screen.

4. Type “ipconfig /release” just like that, and hit “enter”
5. Type “exit” and leave the prompt
6. Right-click on “Network Places” or “My Network Places” on your desktop.
7. Click on “properties”

You should now be on a screen with something titled “Local Area Connection”, or something close to that, and, if you have a network hooked up, all of your other networks.

8. Right click on “Local Area Connection” and click “properties”
9. Double-click on the “Internet Protocol (TCP/IP)” from the list under the “General” tab
10. Click on “Use the following IP address” under the “General” tab
11. Create an IP address (It doesn’t matter what it is. I just type 1 and 2 until i fill the area up).
12. Press “Tab” and it should automatically fill in the “Subnet Mask” section with default numbers.
13. Hit the “Ok” button here
14. Hit the “Ok” button again

You should now be back to the “Local Area Connection” screen.

15. Right-click back on “Local Area Connection” and go to properties again.
16. Go back to the “TCP/IP” settings
17. This time, select “Obtain an IP address automatically”
tongue.gif 18. Hit “Ok”
19. Hit “Ok” again
20. You now have a new IP address

With a little practice, you can easily get this process down to 15 seconds.

P.S:
This only changes your dynamic IP address, not your ISP/IP address. If you plan on hacking a website with this trick be extremely careful, because if they try a little, they can trace it back

First of all, this tweak only apply to those who only have one HDD on their primary IDE channel (nothing else on device 0 or 1) and a CD-ROM and/or DVD-ROM on the secondary IDE channel. Each time you boot Windows XP, there’s an updated file called NTOSBOOT-*.pf who appears in your prefetch directory (%SystemRoot%Prefetch) and there’s no need to erease any other files as the new prefetch option in XP really improves loading time of installed programs. We only want WindowsXP to boot faster and not decrease its performance. Thanks to Rod Cahoon (for the prefetch automation process…with a minor change of mine) and Zeb for the IDE Channel tweak as those two tricks, coupled together with a little modification, result in an EXTREMELY fast bootup:

1. Open notepad.exe, type “del c:windowsprefetch tosboot-*.* /q” (without the quotes) & save as “ntosboot.bat” in c:
2. From the Start menu, select “Run…” & type “gpedit.msc”.
3. Double click “Windows Settings” under “Computer Configuration” and double click again on “Shutdown” in the right window.
4. In the new window, click “add”, “Browse”, locate your “ntosboot.bat” file & click “Open”.
5. Click “OK”, “Apply” & “OK” once again to exit.
6. From the Start menu, select “Run…” & type “devmgmt.msc”.
7. Double click on “IDE ATA/ATAPI controllers”
8. Right click on “Primary IDE Channel” and select “Properties”.
9. Select the “Advanced Settings” tab then on the device 0 or 1 that doesn’t have ‘device type’ greyed out select ‘none’ instead of ‘autodetect’ & click “OK”.
10. Right click on “Secondary IDE channel”, select “Properties” and repeat step 9.
11. Reboot your computer.

WindowsXP should now boot REALLY faster.

First of all, this tweak only apply to those who only have one HDD on their primary IDE channel (nothing else on device 0 or 1) and a CD-ROM and/or DVD-ROM on the secondary IDE channel. Each time you boot Windows XP, there’s an updated file called NTOSBOOT-*.pf who appears in your prefetch directory (%SystemRoot%Prefetch) and there’s no need to erease any other files as the new prefetch option in XP really improves loading time of installed programs. We only want WindowsXP to boot faster and not decrease its performance. Thanks to Rod Cahoon (for the prefetch automation process…with a minor change of mine) and Zeb for the IDE Channel tweak as those two tricks, coupled together with a little modification, result in an EXTREMELY fast bootup:

1. Open notepad.exe, type “del c:windowsprefetch tosboot-*.* /q” (without the quotes) & save as “ntosboot.bat” in c:
2. From the Start menu, select “Run…” & type “gpedit.msc”.
3. Double click “Windows Settings” under “Computer Configuration” and double click again on “Shutdown” in the right window.
4. In the new window, click “add”, “Browse”, locate your “ntosboot.bat” file & click “Open”.
5. Click “OK”, “Apply” & “OK” once again to exit.
6. From the Start menu, select “Run…” & type “devmgmt.msc”.
7. Double click on “IDE ATA/ATAPI controllers”
8. Right click on “Primary IDE Channel” and select “Properties”.
9. Select the “Advanced Settings” tab then on the device 0 or 1 that doesn’t have ‘device type’ greyed out select ‘none’ instead of ‘autodetect’ & click “OK”.
10. Right click on “Secondary IDE channel”, select “Properties” and repeat step 9.
11. Reboot your computer.

WindowsXP should now boot REALLY faster.

The DVD region code identifies a DVD’s compatibility with the players typically sold in a particular region.
The following graphic shows the approximate location of each region.

Region 0 (or “region free”) is compatible with DVD players from any region.

The majority of all current titles play only in one specific region unless otherwise noted. DVDs sold by Amazon.co.uk are encoded for Region 2 or Region 0. Region 2 DVDs may not work on DVD players in other countries.

Region 1 DVDs sold by Marketplace sellers

Region 1 discs are intended for use with standard DVD players in North America (Canada and the USA). In most instances they can also be played on compatible “multi-region” DVD players (also known as “chipped” or “region-free” players).

They also require an NTSC-compatible television. NTSC is the standard picture format in North America, and differs from the PAL format adopted in Britain and Europe. Region 1 DVDs are usually presented in NTSC format, so you should ensure that your TV is capable of reading the NTSC signal before purchasing Region 1 DVDs.

Regional Coding Enhancement (RCE)

Regional Coding Enhancement (RCE) has been added by some film studios (specifically Warner and Columbia) to selected Region 1 DVDs, with the intention of preventing these discs from playing on some multi-region DVD players. We are therefore unable to guarantee that all Region 1 discs will be compatible with all multi-region players.

Global DVD region countries

This is not a definitive list and is intended only as a guide.

Region 1 – US, US Territories and Canada

American Samoa, Canada, Guam, Palau, Mariana Islands, Marshall Islands, Puerto Rico, Micronesia, United States, U.S. Virgin Islands

Region 2 – UK, Europe, Japan, South Africa and Middle East

Albania, Andorra, Austria, Bahrain, Belgium, Bosnia and Herzegovina, Bulgaria, Croatia, Czech Republic, Denmark, Egypt, Finland, France, Germany, Gibraltar, Greece, Greenland, Hungary, Iceland, Iran, Iraq, Ireland, Israel, Italy, Japan, Jordan, Kuwait, Lebanon, Liechtenstein, Luxembourg, Macedonia, Malta, Moldova, Monaco, Netherlands, Norway, Oman, Poland, Portugal, Qatar, Romania, San Marino, Saudi Arabia, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Syria, United Arab Emirates, United Kingdom, Vatican City, Yemen, Yugoslavia

Region 3 – Southeast and East Asia

Cambodia, Hong Kong, Indonesia, Laos, Malaysia, Myanmar, Phillipines, South Korea, Taiwan, Thailand, Vietnam

Region 4 – Australia, New Zealand, Central and South America

Antigua, Argentina, Aruba, Australia, Bahamas, Barbados, Barbuda, Belize, Bolivia, Brazil, Chile, Colombia, Costa Rica, Cuba, Dominica, Dominican Republic, Ecuador, El Salvador, Falkland Islands, French Guiana, Grenada, Guatemala, Guyana, Haiti, Honduras, Jamaica, Mexico, New Guinea, New Zealand, Nicaragua, Panama, Paraguay, Peru, Suriname, Trinidad, Tobago, Uruguay

Region 5 – Former Soviet Union, Indian sub-continent, Africa, North Korea and Mongolia

Afghanistan, Algeria, Angola, Bangladesh, Belarus, Benin, Botswana, Burkina Faso, Burundi, Cameroon, Cape Verde, Central African Republic, Chad, Comoros, Congo, Djibouti, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Gabon, Gambia, Georgia, Ghana, Guinea, Guinea-Bissau, India, Ivory Coast, Kazakhstan, Kenya, Latvia, Lesotho, Liberia, Libya, Lithuania, Madagascar, Malawi, Mali, Mauritania, Mauritius, Mongolia, Morocco, Mozambique, Namibia, Niger, Nigeria, North Korea, Pakistan, Russia, Rwanda, Sao Tome and Principe, Senegal, Seychelles, Sierra Leone, Somalia, Sri Lanka, St. Helena, Sudan, Tanzania, Togo, Tunisia, Turkmenistan, Uganda, Ukraine, Uzbekistan, Zambia, Zimbabwe

Region 6 – China

China

Region 7 – Reserved for future use

Region 8 – International Territories (ships, planes, etc)

Telefónica del Perú, ha lanzado un nuevo plan, perdón servicio, Speedy Control, con la intención de promover la conectividad de más peruanos a internet. Dicen que este nuevo servicio forma parte de su compromiso de promover el acceso a la banda ancha en el país, en papel esto suena muy lindo, y digno de darles un merecido premio.

Pero en la realidad este “compromiso” no es más que una tactica burda de telefónica de implantar el antiguo mecanismo de pago por horas a diferencia del actual servicio de tarifa plana. El Speedy Control se vende como un servicio que permite controlar el gasto mensual, pagando solamente lo que consume el usuario, claro eso es correcto, pero lo que no se manifiesta que el costo por hora es mayor que el de otros planes speedy.

Vamos a hacer cálculos, porque los números no mienten a diferencia de la publicidad engañosa con letras chiquititas que usa timofónica.

Primero obtendremos el precio por hora de conexion a internet que involucra del plan speedy más barato, Speedy 200, esta información esta publicada en la página web de telefónica.

Recordemos que este plan tiene una tarifa plana lo que significa el acceso a internet durantes las 24 horas del dia, los 7 dias de la semana. Tome 30 días como promedio para facilitar los calculos.